The fabrication of all-porcelain teeth is similar to that of porcelain teeth. In the production, the doctor will recommend the good teeth on both sides of the missing teeth as abutment teeth, grinding about 1/3 of the tooth tissue, but, all-porcelain teeth than porcelain teeth to wear away the tooth tissue is relatively less, and no pain. The specific production process is as follows: 1, the production of all-porcelain dental model, accurate model is the basis for high-quality all-porcelain teeth. 2, the scientific design of all-porcelain teeth, to ensure that the wearing of all-porcelain teeth have a certain retention and resistance. 3, the doctor grinds away a certain amount of dental tissue, this process is called dental preparation. This is a key part of the production of all-porcelain teeth, there are quite high technical requirements, grinding the preparation of good or bad, related to the production of good all-porcelain teeth is easy to wear, as well as to ensure its solidity. 4, colorimetric, in order to ensure that the production of porcelain teeth and the original teeth or adjacent teeth color similar, the doctor must use the colorimetric plate and the original color of the affected teeth for comparison, in the colorimetric plate to determine the approximate shade range, to avoid inconsistencies between all-porcelain teeth and natural teeth color. 5, wearing temporary crowns. 6, according to the model processing and manufacturing of all-porcelain teeth. It takes about one week. 7.Remove the temporary crown, put in the all-porcelain teeth, and make appropriate adjustments.