If you are not very satisfied with your own face, the shape of the frame should not be the same as the face, (round on round), (square with square) the visual effect will be too strong, for example, round face type people should avoid choosing round frames, square face type people should avoid choosing square frames. However, you should not choose frames that are the extreme opposite of your face, so as not to impress people from afar with the face that protrudes from under the frame. Round face types are also not suitable for square frames, and square face types are not suitable for round frames either. Comparing the upper and lower edges of the frames, if the lower edge is large, the lower jaw will appear fat, and if the lower edge is small, the lower jaw will appear thin. Therefore, people with a slightly chubby face should choose frames with a slightly narrower lower edge, while people with a thinner chin should choose frames with a slightly wider lower edge. Generally speaking, after wearing glasses, eyes should try to fall in the middle of the frame, and the frame size is best not to exceed one-third of the face area, do not press the eyebrows to the cheekbones, but also to avoid exceeding the middle of the cheekbones, and the upper edge of the frame do not exceed the eyebrows, if the upper edge of the frame exceeds the eyebrows, it will be framed in the frame, resulting in the feeling of “double eyebrows”, which looks very unnatural. It looks very unnatural. Where there is decoration is the focus of vision, you can skillfully shift the focus and emphasize the key point to modify the size and width of the face. For example, half-rimmed eyeglasses with the design focusing on the upper rim are a boon for people with short faces or short lower chambers (from the middle of the face to the chin)! While temples with special patterns can make the face appear wider. A square face is shorter and has a more prominent, and angular jawline. We need to pay attention to the two characteristics of a square face: square and short. The use of round frames, especially those with rounded bottoms, can reduce the appearance of overly pronounced angles. People with square faces have wider cheeks and shorter faces, which makes them look rigid. To soften the lines of the face, you can choose frames with a slight curve to make the face look softer and to soften the overly wide cheeks. To soften the lines of the face, you can choose a slightly curved frame to make the face look softer and soften the overly wide cheeks. There are two ways to pull the “long” face: 1, choose a frame with a smaller height, the height of the frame is too big, it will take up a large part of the face, which will make people feel that the face is shorter. 2. Choose frames that are slightly wider than your face, which will make your face look slightly longer. Like a square face, a rectangular face has a pronounced jawline, but the difference is that the face is longer. We still need to mitigate the angles with rounded frames, but we also need to shorten the shape of the face. Contrary to the aforementioned square face shape: choose frames with a greater height and with the temples positioned in the center so that the frames are able to occupy the appropriate part of the face, and choose frames with thicker frames in order to reduce the impression of a long face. For men with a rectangular face: it is advisable to choose frames with longer rim heights, such as large square frames with a large height. Women with rectangular faces: it is advisable to choose frames with angular and almost square shapes, and the height of the rims can be higher in order to neutralize the excessively long face shape. Inverted triangle face, characterized by a wider forehead, prominent cheekbones, and a narrow and pointed jaw. This face shape is not balanced in appearance, with the upper part of the face being larger and more prominent than the lower part, and requires frames with the opposite appearance, i.e. wider at the bottom so as to increase the width of the lower part of the face. The lower position of the temples also helps to improve this effect. A round face is the exact opposite of a square face, so the principle of frame selection is basically the exact opposite of a square face; frames with more pronounced angles are needed to improve the contour of the face, but at the same time, the principle of “lengthening” of a square face is also needed, i.e., the use of frames with lower heights and higher positions of the temples. For round faces, slender or square frames or pear-shaped frames Round faces have shorter faces, so it is best to use slender frames with a slight curve to harmonize the overall look. Angled and square frames, on the other hand, are good for slimming down the lines of the face. This will enhance your strengths and avoid your weaknesses, making your face appear more defined and refreshed! Men with round faces: It is better to choose flat or pear-shaped frames, not too round and too square frames. Female round face type: in principle, avoid choosing any extremely obvious characteristics of the frame, it is appropriate to choose a slightly flat and slightly warped type of frame, it is not appropriate to choose too round or linear type of frame. The oval face, also known as the goose egg face, is a beautiful face that is very much in line with oriental aesthetic standards. If you have such a face shape, you can wear all kinds of frames, just pay attention to the size of the frames should be proportional to the size of your face. Especially for women with oval face shape, it is suitable to choose any style of frames, but it is better not to use linear frames, that is, frames that are too high and too flat.