If the filling of the screw hole of the dental implant has fallen out, it is usually enough to go to the hospital for a temporary re-sealing and filling, but at the same time it is also necessary to check the use of the restorative screw, the implant abutment and the crown.
If the filling of the screw hole of the dental implant falls out, it may be caused by the loosening of the bonding or the loosening of the crown, or the falling off of the screw, it is necessary to go to the hospital to check the condition of the implant, make sure that the screw is not loosened, and that there is no damage to the crown of the abutment, and then disinfect the inner part of the screw hole with alcohol, and then seal it temporarily to reseal the resin bonding.
If it is found that the abutment screw is loose after checking, it is necessary to re-tighten the screw, and if the abutment screw is worn and damaged, it is necessary to replace the abutment screw and re-seal the hole.
Dental implant screw hole filling dropped, it is recommended to consult a doctor in time to check the reason and deal with it in time, so as not to cause fracture of the restoration.