Internet consultation of medical conditions, often need to provide X-ray or CT, MRI (magnetic resonance imaging) film for the doctor’s reference (the amount of information provided by the film is far more valuable than the report). Here’s how to use a general home digital camera to shoot the above information: 1, choose a good background: it is best to use a viewing light: that is, a light box with fluorescent tubes inside, you may have seen in the hospital. At home, you can use tape to fix the film on a clean window glass (note that the text on the film is used as the basis for placing the film correctly). The background outside the window should be a cloudless sky without any scenery, there can be no background such as buildings, trees, clouds, etc., and no direct sunlight on the window glass. 2, adjust the camera parameters: the resolution is set to the highest, note that the flash must be turned off, open macro. 3, shooting: If you do not have a tripod, then make sure that your hands are steady. The whole X-ray film should be fully ingested when taking X-rays. When taking CT and MRI films, take the whole film first, and then take each small picture in the order from left to right and from top to bottom. 4.Check the shooting effect: If the quality of the pictures taken is qualified, put them on the camera screen to the maximum, and you can see the text and other information on the film. If the picture is clear, upload it.