The core component of the Specific Electromagnetic Wave Therapeutic Apparatus is the TDP treatment plate, which is made with a coating of more than 30 kinds of specially selected elements. Under the action of temperature, it can produce electromagnetic wave with information energy of dozens of elements, so as to play a therapeutic effect of anti-inflammation, pain relief, improvement of microcirculation and acceleration of wound healing on the organism. Specific use methods are as follows: 1. Access 220V voltage, the buzzer sounded, the power indicator light, digital tube display 00; press the “time” button to set the treatment time, press an increase of 10 minutes, up to 90 minutes. 2. Press the “temperature” button, the digital tube displays 10, then the power 100%, press again to display 9, the power 90%. And so on until 5, the power is 50%, and then press return, the digital tube shows 10, the power is 100%. To set the temperature. 3. Press the “on/off” button, the work indicator light, start counting down; time, the work indicator light off, the buzzer sounded three times, the end of the treatment. 4. Reset “time”, “temperature”, press the “on/off” button to start the next treatment. 5. In the process of heating treatment. Press the “On/Off” button to terminate the treatment. Disconnect the power supply if the treatment is not to be continued. Note that when receiving specific electromagnetic wave therapy device treatment, the irradiated area must be completely exposed, otherwise it will affect the therapeutic effect; the irradiation distance should not be too close, so as to avoid burns. It is recommended to use the specific electromagnetic wave therapy device under the guidance of a professional physician or rehabilitation therapist.