Steps of dental veneers:Dental preparation, model making, technician making, try on bonding completion. 1. Dental preparation: before making the veneers, you need to prepare the teeth, grinding out a gap of about 0.5mm on the lip side of the teeth to leave the thickness of the veneers to be made, and try to retain the enamel. 2. Modeling: After the preparation of the teeth is completed, silicone rubber is used to make the model, which needs to be accurate, clear and bubble-free. 3. Technician production: The model is cleaned and sterilized and then handed over to the technician for production. 4. Trial wear and bonding: The veneers are made and corrected by trial wear in the mouth, and then bonded with special bonding agent, removing the excess bonding agent and polishing the veneer bonding place, and using dental floss to clean up the residue of bonding agent between the teeth to complete the whole process of veneers.