The fracture repositioning methods are as follows: 1. pulling and stretching traction, this repositioning method is possible for all fractures, it is a type of basic repositioning technique, when the fracture is repositioned, the fracture end should be pulled first; 2. lifting and pulling and shaking, after the fracture end is pulled and repositioned, there is still a small misalignment can be reset by gently shaking; 3. fracture top gyration, applicable to the fracture site has a relatively long The fracture end is a long cusp, so the fracture end is pulled to make the cusp initially reset, and then the fracture end is used as a fulcrum to reverse the fracture; 4. Rotation reset, which is applied to the fracture end with rotation and displacement, so it is pulled first and then rotated in the opposite direction to reset; 5. End lifting and squeezing, which is applied to the fracture end with shortening and angulation, and the fracture end is difficult to pull, so it can be reset by pressing on the fracture end; 6. The former is mainly applied when the fracture end is separated, and then it should be brought together; the latter is seen when two bones are fractured side by side at the same time, and then the separation should be used to keep the proper distance between the two bones to achieve reset.