1, we recommend that you take pictures when you will check the film to a white wall, white light source or hospital viewing light box as the background, or lay the film on the glass plate, behind with scattered light as the background, if there is no condition can also be photographed in their own window glass, but should pay attention to the outdoor background is not too chaotic, but the photos taken this way will not be very clear; you can also use a scanner to scan, this method is the best. When shooting the background light source behind the shooter is best darker or there will be obvious reflections. Use black and white mode close up to open the mandatory non-flash case to take pictures, after taking a good look at their own photos can not see clearly the words on the film, if the font has a blurred situation need to reshoot. It is best to take a small frame of a small frame. 2, if possible, try to use a tripod, no tripod, try to hold the camera to avoid lens shaking, if you use the phone to take pictures can use the volume keys to avoid touching the screen caused by shaking resulting in blurred photos. Check the photos taken after shooting if the text in the corners is not clear, indicating that the shooting was not successful and needs to be re-shoot. 3, the camera with macro mode, close the flash, ISO with 200 or 400 can be, even if the camera is 10 megapixels, you only need to use the most space-saving S or M mode, that is, with 2 megapixels can be, the image must not be too large. If the words on the MRI film are clearly photographed, it means that the photo is good. The file should not be too large, preferably around 300-500k, to avoid inconvenience in uploading and downloading. 4, do not need to take the whole film, or every picture, not sure which one to choose, can be 4-6 pictures. Especially the one with a small arrow is the focus of the need to shoot . 5, after taking pictures of their own cell phones or computers to see, can see clearly the small print on the film even if the shot is clear.