Atlantoaxial subluxation traction is performed by a specialized physician and is accomplished by pulling the head and neck with the use of an occipitomandibular belt. The traditional traction treatment process is to use the occipitomandibular belt to wrap around or pocket the jaw and face, and after proper protection against overstretching, to exert a certain force in the direction of the top of the head for traction, and the occipitomandibular belt continues to exert force through the pulley at the head of the bed. The angle of the head of the bed should be adjusted when traction is performed, and X-ray and CT examinations should be performed during the traction process to ensure the correct angle of repositioning, and the head of the bed should be adjusted according to the specific situation. It is also necessary to adjust the weight and direction of traction at any time according to the specific situation. Usually, it takes 2~3 weeks of continuous treatment, and after reset, it is necessary to continue to wear a neck brace or head-neck-thorax brace for 4 weeks. It should be noted that this operation has a certain degree of risk, and the specific parameters of the operation need to be calculated by a professional physician, and absolutely prohibited to carry out unauthorized. It is recommended that the patient seek medical advice and treatment under the guidance of a doctor.