1.Where physical therapy is required, the physician fills out the treatment application form and determines the type and course of treatment after examination and diagnosis by the physical therapy physician. 2.Strictly implement the checking system and technical operation procedures. Before treatment, explain the precautions; careful observation in treatment, abnormalities found in a timely manner; after treatment, carefully record. 3.Physical therapy staff should often go deep into the ward to understand the condition, observe the effect of treatment, introduce physical therapy methods, to better play the role of physical therapy. For the inpatients who cannot move, they can go to the bedside consultation and treatment. 4.After the course of treatment, a summary should be made in time and deposited in the medical record for the reference of the clinical department. 5.When carrying out high frequency treatment, all metal objects on the patient should be removed and the isolation of the ground and the patient should be noted. Do not contact with brick wall, water pipe or wet floor when the patient and the operator are carrying out treatment. High frequency all machines should avoid contact with the ground. UHF rate treatment equipment, electrotherapy before, must check whether the wire contact is perfect, the plate pole has no cracks, broken, otherwise can not be used. Large ultra-short wave disable monopolar method. At the end of the shift, all physical therapy equipment cut off the power. Treatment patients are not allowed to touch the machine. 6, care of physical therapy equipment, check before use, wipe after use, regular inspection and maintenance. To avoid vibration damage to the electronic tube and ultraviolet lamp. Physical therapy machines should have a few minutes of rest after each treatment.