Flurbiprofen gel paste can not be applied, may involve the following reasons, according to different reasons to take the appropriate disposition: 1, the local skin conditions are not good, including more sweaty skin or bath after the water is not dry on the paste, skin local not clean enough, can lead to paste paste can not be applied. For this problem, you can moderate the adjustment of clothing, adjust the room temperature, do not let the patient sweat too much. If the skin is not clean, you can clean and wash it accordingly, wait until the water is completely dry and the skin is locally dry before applying the paste, if there is water, it will often cause the paste not to stick. 2, the part of the paste that can be seen, such as the part of the joint, more activity, paste paste after the corresponding activity, the paste appears loose or paste can not be applied. Patients are advised to reduce the activities of the joints to prevent the paste from falling off if it is applied to the joints. Secondly, try not to support the plaster when you put it on, try to relax some, let the plaster and the skin as much as possible to achieve the maximum area of contact, can improve the stability of the plaster.