After the band-aid is torn open to go, the cotton area affixed to the location of the finger wound, the tape area to the two sides of the extension of obediently affixed to the finger can be, of course, affixed to the band-aid before the wound should be disinfected and cleaned. However, sometimes the tip of the finger is injured, coupled with the finger is relatively thin, the band-aid is not easy to firmly adhere to the finger, this time you need to slightly deal with the band-aid, and then continue to use: The first step is to cut the tape area on both sides of the band-aid along the horizontal fold line after the band-aid has been removed, stopping when you reach the cotton area and not continuing to cut. The second step, ready to cut the band-aid, it is necessary to carefully disinfect and clean the wound, press for a few minutes to confirm that there is no blood out of the wound can begin to stick the band-aid. The third step, the cotton area of the bandage aligned with the wound covered well, the tape area of the horizontal upper part of the two sides of the tape area cross-stick on the finger, and then the lower part of the two sides of the tape area cross-stick on the top of the upper part of the tape. Once it’s stuck in place it will be a little stronger than the usual way of taping.