Steps for early pregnancy test 1. Tear open the foil pouch, remove the test pen and open the cap; 2. Collect urine for testing, including the following methods: (1) Collect urine in a clean, dry urine cup and dip the test pen into the urine for 5 seconds; (2) Collect urine in a clean, dry urine cup, draw a small amount of urine from the urine cup with a straw, and slowly drop 2-5 drops of urine into the test pen ring (3) Place the test pen into the expected urine flow area and drench the sample end of the test pen for 5-10 seconds. (3) Place the test pen flat on the table; (4) Wait for the appearance of the purplish-red band. The test result should be interpreted at 3 minutes and invalid after 10 minutes. Hospital urine pregnancy test examination steps Hospital urine pregnancy test examination is generally divided into three steps, namely urine collection – professional examination – giving the results. Among them, urine collection is the step with the highest patient involvement and requires extra attention, and the last two steps need to be performed by professional laboratory staff. 1.Receive the sterile container after registration; 2.Paste the identification barcode on the container and confirm the relevant information is correct; 3.Take the urine to the sterile container; 4.After the sample is finished, tighten the lid and send the urine sample for examination immediately to avoid contamination.